What surfaces can be repaired and/or refinished?
Bathtubs, showers, countertops, cultured marble, formica, tile, vinyl, glass, and spas are common surfaces we repair and refinish.
How is a tub refinished?
The tub is scraped, washed and solvents are used to clean it. Then the tub, if steel or cast iron, is completely etched with hydrofluoric acid. Other tubs are prepared with non-etch coatings. Tubs are then neutralized and sanded. Solvents are again used. An undercoat is applied and then two or three coats in the color of your choice are applied. The finish coats are not baked on porcelain or epoxy, but an extremely hard catalyzed material.
What type of materials do you use to refinish?
For most refinishing we use an acrylic polyurethane system. Counter Effects coatings vary based on the specific application being used and may be water or epoxy based. Some coatings are also available in a low VOC formula.
How long will refinishing last?
If proper cleaning procedures are followed, your newly refinished item will look beautiful for 8-12 years. Wall tile that is refinished should last indefinitely.
What should I use to clean a refinished surface?
Your new finish can easily be cleaned with a mild, liquid cleanser, such as Dawn dish soap. In general, any product that is approved for use on acrylic surfaces should be okay to use.
DO NOT use any abrasive or bleach containing cleaners such as but not limited to: Soft Scrub, Ajax, Comet, Tilex, Clean Shower, Bon Ami, bleach or lemon cleansers. See here for care and maintenance instructions.
How long will my refinished item be out of use?
In general, tubs should not be used until the following evening (Approximately 30 hours). Countertops should not be used for 48 hours. However, some coatings do have a shorter cure time.
Is a refinished item likely to chip?
No, it is as durable if not stronger than the original surface. Whether or not any surface will chip is dependent on the angle at which the dropped item hits the surface.
Do refinished tubs look painted?
No. The process we use involves using a fine-finish spray gun process, which means you won’t be able to tell the tub has been refinished at all. No brush marks.
What colors are available?
We can refinish your surfaces in virtually any color! In addition to our color chart which is based on the Bemis Color chips, if you provide us a sample item or swatch, our manufacturer can custom make our coating to match your items.
Do you provide a warranty?
Yes, we provide a 5 year warranty on bathtub refinishing for residential homes. For commercial and rental properties we provide a 1 year warranty.
How much do repairs or refinishing cost?
Repair and refinishing costs vary depending on what is needed. Repairs or refinishing will always be a fraction of the total cost of replacing. Our work can often save over 75% compared to the cost removal and replacement. Call 512-865-9516 for a free estimate.